| This is a fairly technical write-up, but I will explain each step of the build for those who wish to attempt this kind of work for the first time. This mod is designed to replace the factory Pontiac Firebird or Chevrolet Camaro shifter Light with an LED array. This not only provides more light, but it will also consume less power. If you have any questions please feel free to shoot me an e-mail. |
| |
|
| INVENTORY |
|
| Required Tools: |
| 1. Soldering Iron (with solder) |
| 2. Dikes |
| 3. Needle Nose Pliers |
| 4. Dremel (with cutting disks) |
| 5.Philips screwdriver (#2 prefered) |
| 6. SMALL flattip screwdriver |
| 7. Fine Point Permanent Marker |
| 8. Drill (with 1/8 to 7/64 bit) |
|
| Materials Needed: |
| 1. Electrical Tape |
|
| 2. Grid-Style PC Board-2200 Holes (RadioShack Part Number 276-147) |
|
| 3. * 2 - ** ohm ** Watt, **% carbon film resistors |
|
| 4. * 6 - 20000 mcd 5mm Red LED's (Substitutions possible) |
|
| 5. Wire (Size must be larger than 22 gauge, and style is completly optional) |
| 6. Alchohol pads/wipes |
| 7. Small Zip Ties |
| 8. Two part epoxy |
|
|
| * - Means that item can be supstituded with another of similar chareteristics |
|
|
|
***** If I forgot something or you found a better way please tell me so I can update this to make it easier for others!! ***** |
|
